Detail Information

PE Plastic Traffic Water Filled Barrier Wall Use In Highway And Roads

Water Filled Traffic Barriers Used In The Highway And Roads

Water filled traffic barriers are made of Odorless, tasteless, non-toxic, surface dull, hot white waxy particles, density

of about 0.920g/CM3, melting point 130-145 ℃, insoluble in water, slightly soluble in hydrogen, toluene, acid and alkali

resistance, good insulation.

1. Lightweight for easy loading and installation

2. Fill with water or sand for heavy-duty use

3. Polyethylene construction with reflective tape for high visibility

4. Integrated lock of each barrier can be linked to line with any angle or barrier chain

5. Large range for use: can be used as part of construction project, rail for separation.

6. Suitable for any road, road turnoff, gas station and so on.

7. Flexible: Can stand press of car and any other hard things

8. Durable: Anti-UV, sun-proof, waterproof, heat-resistant, cold-resistant, anti-impact, colorfast

9. Color : Solid color, Long lasting brilliant fluorescent color, red & yellow

10. Visible : Both in the daytime and night, it is highly visible. Especially at night,

it can reflect light to catch driver's attention.

11. Stable : High-density base creates low center of gravity for maximum stability

12. Portable : Easy to store! Easy to handle! Easy to use!

13. Widely used: Suitable for the entrance of the highway, the crossing of the roads and toll station to

warn the drivers to reduce the accidents.

Water filled traffic barriers Featuers:

1. Made of PE;

2. Anti-UV,fading resistant and no ageing;

3. Yellow/Red/White/Blue,various combination colors,high visibility;

4. Interlock design,interlocked one by one.

Water filled traffic barriers Application:

Used for separating the traffic lane,control the direction of traffic.

Charasteristcs

1) One time forming, cold resistant, hot resistant, anti-impact, not easy to be old.

2) The color can be yellow and red and it is attractive in the night with the reflection film.

3) With the water in it, the buffer elasticity will be better, without the water, it can be moved easily.

Size: 1500*800mm can load water about 264kgs

• Road Water Fill Road Barrier is very large, and able to be filled in water to increase its stability.

• Warning Water Fill Road Barriers are widely used on beaches to avoid damages of tide.